Easy Install Video Guide
Follow our step-by-step guide to install your Novaware Magnetic Knife Holder with ease.
Tools Needed
- Drill with 5/32” standard drill bit
- 3/16” ceramic drill bit (if needed)
- Phillips head screwdriver
- Screws x2 (included)
- Wall anchors x2 (included)
- Spirit level (included)
- Spray bottle
- Hammer
- Stud finder
- Pencil
Screws and Wall Anchors Included
Instructions
Locating a stud beam
Use a stud finder to locate wooden beams and lightly mark on wall with pencil for reference.
Set desired position
Set desired position of knife holder and ensure it is level. Lightly mark drill points on wall in line with screw holes.
Drilling the holes
Drill 2 holes through the wall using the appropriate drill bits (see tools needed).
Inserting wall anchors
Wipe tiles from water and insert included wall plugs where necessary.
Screw the screws
Use a Phillips head screwdriver to screw in screws. Ensure you leave a lip to mount the unit.
Hanging your knife holder
Gently hang your Novaware Magnetic Knife Holder and ensure it is mounted firmly.
Enjoy!
Your knife holder is now ready to use.
Novaware Tip - Drilling into Tiles
Use a spray bottle and continuously spray water mist while drilling to keep the tile drill bit cool.
